Camera Serial Interface 2 V1.0 - instruction-matter28’s diary

MIPI Camera Serial Interface

Camera Serial Interface The Camera Serial Interface CSI is a specification of the CSI-2. The MIPI CSI-2 v1.0 specification was released in 2005.

The Camera Working Group released the CSI-2 v1.0 specification in 2005. MIPI Alliance Standard for Camera Serial Interface CSI-2.

Referenced Documents including but not limited to : MIPI Alliance Standard for Camera Serial Interface 2 CSI-2 v1.0; MIPI Alliance D-PHY Specification v00-90-00.

The Camera Working Group develops and maintains Camera Serial Interface and supporting documents. The group released produced the CSI-2 v1.0 specification in.

LinkSprite JPEG Color Camera Serial UART Interface V1.1 LinkSprite Technologies Inc. 2 www.linksprite.com.

Arasan provides a Total CSI-2 IP Solution supporting two options: CSI-2 v1.2 for D-PHY physical interface only, and CSI-2 v1.3 for the new MIPI C-PHY v1.0 and D-PHY v.1.1, v1.2, and a future v2.0. Arasan offers the C-PHY in a combination configuration that supports both C-PHY interfaces and D-PHY interfaces. Our implementation makes efficient use of the high frequency signally pins for a minimal overhead to support both physical interfaces.

Arasan is the leading supplier of MIPI Alliance IP cores and its products are used by most first tier imaging suppliers. Arasan has deep experience with Camera Serial Interface integration and system implementations combining both the analog PHY and digital controller IP to reduce design risk and provide shorter time to market for mobile devices. The MIPI Camera Serial Interface is targeted for mobile platforms that integrate a camera sub-system requiring an interface and protocol that allows data to be transmitted from the camera to the host processor. The MIPI alliance created the Camera Serial Interface CSI specification to standardize this interface. The specification provides mobile device manufacturers a standardized high-performance interface that scales with the increasing frame rates, resolution and pixel depth of the imaging systems.

The CSI-2 specification provides a scalable high-speed interface and low-speed control bus. While the CSI-3 specification has multiple enhancements like an integrated data and control bus that lowers pin count and a higher bandwidth interface to meet the next generation of mobile applications. Arasan Chip Systems provides both transmit and receive digital CSI controllers that directly integrates with an Arasan analog D-PHY or M-PHY. This provides customers a complete proven solution for their mobile applications. Extensive experience and compliance testing with all versions of MIPI Camera Serial Interface specifications make the choice of Arasan CSI-2, D-PHY and CSI-3, M-PHY controller s the lowest risk approach for customers developing mobile devices.

And CSI-2 v1.3 for the new MIPI C-PHY v1.0 and D-PHY v.1.1, v1.2, The MIPI Camera Serial Interface is targeted for mobile platforms that integrate a camera.